Reasons why someone would purchase a prepaid cellular phone.

Prepaid cellular phone is an alternative to a monthly cellular phone plan. Prepaid cellular phone services are currently being offered by AT&T, Cricket, Verizon, and many other companies. There are many reasons why someone would want to purchase a prepaid cellular phone. A person could be planning to use the cellular phone infrequently or irregularly, doesn’t want to commit to a contract when signing up for a cellular phone plan, or wants to save money when using a cellular phone.

Prepaid cellular phone benefits.

There are several benefits that a prepaid cellular phone has. For example, your prepaid minutes will generally not expire at the end of the month, so you can use all the minutes that you paid for. Prepaid cellular phones are usually not expensive. You can definitely get a phone for less than $50 or even receive a free cellular phone. During some promotions you can also receive free cellular phone accessories.

Prepaid cellular phone drawbacks.

There are some drawbacks that a prepaid cellular phone has. For example, prepaid cellular phone’s talk time is generally more expensive than talk time of monthly cellular phone plans. There could be some restriction like expiration of minutes after some period of time. It could be annoying for some people when their prepaid time suddenly ends and they need to go buy extra time.

How to select the prepaid cellular phone

Calculate the approximate amount of minutes that you are going to use each month talking on a prepaid cellular phone and compare their cost to the cost of monthly cellular phone plan. If the cost of prepaid cell phone talk time is cheaper then the monthly service plan, you would probably benefit from signing up for the first one. Also take into consideration the available promotions, cellular phone features (new technology advances like a camera cell phone could be available), and any possible contract that you might have to sign.

Visit http://www.camera-cell-phones-2u.com

We are now well ensconced in a time when the Web is riddled with graphics, animations, sounds, and videos, bringing about a necessity for superior internet access such as that which broadband can provide. The fact is that anything less than the speed supplied by a broadband cable has become inadequate for today’s Web users.

Of course, if you use the internet only once every so often, you wouldn’t be as heavily dependent upon high-speed internet access as is provided by broadband, however, if you’re a regular user, it’s virtually a necessity.

But wait a minute?even though you use the internet, it doesn’t mean you know exactly what this high focus form of internet access actually is. So lets start there. In essence, broadband is a very fast form of internet connection. Broadband Will provide you with a noticeably faster internet speed than a dial-up connection.

Broadband used to be a challenge only because of it’s limited availability, however, today there are many ways that you can have a much faster connection. The delivery methods of broadband have been expanded to the following types of broadband cable:

- Copper telephone wires
- Cable TV wires
- Radio microwaves from local base stations
- Satellite microwaves from geo-stationary satellites

Now lets look at why this faster style of internet access is actually better. The benefits of broadband actually include much more than faster downloads. Broadband is the connection that is always "on". As soon as you start up your computer, it’s already connected to the internet. For anyone who has waited for a modem to dial up and connect, the advantage of this is quite apparent. Furthermore, broadband allows you to download movies, music, and web pages that were virtually inaccessible in practical terms when using dial-up.

But the benefits of broadband aren’t just felt by individual users. Businesses, governments, schools, and communities can all experience the superiority that broadband cables can provide.

Here are some examples of benefits for each of those types of organizations:

- Businesses will notice an increase in productivity when large data files transfer quickly and directly among local and head offices, no matter the distance between the locations. Moreover, with the popularity of net-meetings and videoconferencing, a face-to-face meeting becomes entirely possible without the travel costs.

- Schools can now offer equal opportunities to their students no matter their location or funding. A student in a remote community is now able to use a broadband connection to receive violin lessons from the same revered instructor as a student in a large city. Moreover, rural students can take virtual field trips and see the same fascinating and educational museums as city kids.

- Local governments are now enjoying broadband benefits that let them provide one-stop shopping for town business transactions, as well as licensing, permits, billing, and utility payments.

- Communities have been quick to jump on the broadband band wagon to promote their local historical and other various tourist attractions. No other marketing resource reaches as far and as effectively as the internet.

There are so many fantastic benefits to a high-speed, broadband internet connection, that it is becoming as "basic" a need as a computer in today’s society.

Dave Gonzalez
http://www.broadband-dsl-directory.com

Google, in their march to stay ahead of the pack of competition, has released Google Desktop Search. With Microsoft’s MSN in the lead position and nipping at Google’s heels, and Google’s new shareholders to please, Google has more incentive than ever to deploy technology both better than the other guy’s, and sooner. After all, the first to get loaded to the desktop is more likely to build and retain user loyalty.

Google Desktop Search allows you to search within various types of files on your computer. It’s still in beta, but is available for download by anyone. It requires Windows XP or Windows 2000 with at least Service Pack 3. It runs as a memory-resident application, with a system tray icon, so that it can index new documents as they are created.

For example, if you know a certain word or phrase was in a Word document, but you don’t remember which one, you can easily locate all documents on your computer that contain that word. Desktop Search can search through email, text, and HTML files, your cached web pages, and MS Office Documents (Word, Excel, and Powerpoint only).

By way of comparison, there is a competing application, also free, from Copernic, not surprisingly called Copernic Desktop Search. At the moment, it is perhaps more advanced than Google’s. For example, Copernic’s software scans the same type of files as does Google’s, but also scans music and video files and PDF documents, while Google does not. Both products can only scan Outlook or Outlook Express email at present.

But don’t count Google out. Webmasters know it’s never wise to do that! After all, they’re still in beta with Desktop Search, and they are as surely aware of Copernic’s product as they are of MSN. Google has both the resources and motivation to not only keep but expand their market leadership.

About The Author

Jakob Jelling is the founder of http://www.sitetube.com. Visit his website for the latest on planning, building, promoting and maintaining websites.

Junk faxes waste the resources of every business. It is estimated that they cost businesses tens of millions of dollars a year in wasted paper, toner and fax machine maintenance. There is nothing more aggravating then coming into the office each morning to find a pile of junk faxes promotion everything from mortgage refinancing to septic tank solutions. I don’t even have a septic tank!

Junk fax companies have been fined by the federal government and sued repeatedly, but has anyone noticed a reduction in the number of junk faxes? I certainly haven’t. The question for most businesses is whether there is a practical way to beat the daily waste of resources caused by junk faxes? Many businesses are using the fax-to-email solution provided through online unified messaging systems.

What is Unified Messaging?

Unified Messaging is a highly flexible communication system that ties all of your communications together. It has the capacity to centralize your voice mail, faxes and email messages in one online area through an email address and single phone number. These systems use their own phone lines and provide you with a separate number, so you don’t have to tie up your own or have an additional line installed.

Fax to Email Conversion

One of the best aspects of Unified Messaging systems is the fax-to-email conversion feature. You are provided with a phone number where people can send you faxes and leave voice mail messages. The beauty of the system is that the faxes are then automatically converted to text files and emailed to an inbox.

So, how does this save you money? You simply delete the junk faxes unless, of course, you need to "maximize the potential of your septic tank." You then read or print out the faxes that are germane to your business. No wasted paper, no wasted toner and no smoke coming out of your fax machine!

An added advantage of the fax-to-email conversion element of unified messaging is the flexibility it gives you. Since the faxes are available to you online, you can print the ones you need at any location. You no longer have the frustrating situation where you are working at home, but need to see a fax that was just sent to your office. You just access your inbox and print it out.

The cost of using unified messaging is very low, particularly when compared to the cost of wasted paper, toner and fax machine maintenance. Depending on the service you use, you may be charged a monthly signup fee, by the minute for phone line usage or both. The best option for your business is entirely dependent upon the number of faxes you expect to receive each month.

Despite the lawsuits and fines issued by government agencies, there is little doubt that junk faxes will continue to bombard your fax machines. Unified messaging provides an inexpensive and practical way to eliminate the cost of junk faxes.

About The Author

Barry Waxler is the President of http://3in1box.com - your unified messaging solution. Visit http://www.3in1box.com to get your FREE unified messaging box or contact Barry at BarryWaxler@3in1box.com

Choosing a cellular phone plan for all your needs.

Cellular phone plans are offered by a variety of cellular phone companies like AT&T, Sprint PCS, T-Mobile, Verizon Wireless, Cingular Wireless, and many more. A cellular phone company of your choice can offer you a cellular phone plan that is right for your individual needs.

Each buyer has access to many promotions offered by cellular phone companies when you sign up for one of their cellular phone plans. These promotions can include free cellular phone, best camera cell phone, free cellular phone services like text messaging, and many more. You can also receive free cellular phone accessories such as a free car charger.

Characteristics of a cellular phone plan.

Each cellular phone plan’s characteristics include price, included minutes, promotional offers, etc. Various cellular phone plans are available based on your cellular phone usage. Many low usage plans are priced as low as $29.99. If you use you cellular phone a lot, you can get a plan with unlimited minutes. If all your family uses cellular phones, you can sign up for a family wireless plan. Prepaid cellular phones are also available for purchase.

Before choosing a cellular phone plan, list all the cellular phone services that you would like to have and specify the amount of minutes you will need each month, the price you are willing to pay, and the features you would like to have in your cellular phone. Based on that information select a cellular phone company that offers a plan that suits all your needs. If several cellular phone plans are available with the same features, select the one that offers better promotions.

Selecting the best cellular phone when you sign up for a cellular phone plan is also very important. As technology advances, many new cellular phones with new features are offered. An example of a new technology advance would be a camera cell phone.

Visit http://www.camera-cell-phones-2u.com

ROUTING PROTOCOLS

A generic term that refers to a formula, or protocol, used by a router to determine the appropriate path over which data is transmitted. The routing protocol also specifies how routers in a network share information with each other and report changes. The routing protocol enables a network to make dynamic adjustments to its conditions, so routing decisions do not have to be predetermined and static.

Routing, Routed and Non-Routable Protocols

ROUTING | ROUTED | NON-ROUTABLE

ROUTING PROTOCOLS

ROUTING PROTOCOLS are the software that allow routers to dynamically advertise and learn routes, determine which routes are available and which are the most efficient routes to a destination. Routing protocols used by the Internet Protocol suite include:

· Routing Information Protocol (RIP and RIP II).
· Open Shortest Path First (OSPF).
· Intermediate System to Intermediate System (IS-IS).
· Interrior Gateway Routing Protocol (IGRP).
· Cisco’s Enhanced Interior Gateway Routing Protocol (EIGRP).
· Border Gateway Protocol (BGP).

Routing is the process of moving data across two or more networks. Within a network, all hosts are directly accessable because they are on the same

ROUTED PROTOCOLS

ROUTED PROTOCOLS are nothing more than data being transported across the networks. Routed protocols include:

· Internet Protocol
o Telnet
o Remote Procedure Call (RPC)
o SNMP
o SMTP
· Novell IPX
· Open Standards Institute networking protocol
· DECnet
· Appletalk
· Banyan Vines
· Xerox Network System (XNS)

Outside a network, specialized devices called ROUTES are used to perform the routing process of forwarding packets between networks. Routers are connected to the edges of two or more networks to provide connectivity between them. These devices are usually dedicated machines with specialized hardware and software to speed up the routing process. These devices send and receive routing information to each other about networks that they can and cannot reach. Routers examine all routes to a destination, determine which routes have the best metric, and insert one or more routes into the IP routing table on the router. By maintaining a current list of known routes, routers can quicky and efficiently send your information on it’s way when received.

There are many companies that produce routers: Cisco, Juniper, Bay, Nortel, 3Com, Cabletron, etc. Each company’s product is different in how it is configured, but most will interoperate so long as they share common physical and data link layer protocols (Cisco HDLC or PPP over Serial, Ethernet etc.). Before purchasing a router for your business, always check with your Internet provider to see what equipment they use, and choose a router, which will interoperate with your Internet provider’s equipment.

NON-ROUTABLE PROTOCOLS

NON-ROUTABLE PROTOCOLS cannot survive being routed. Non-routable protocols presume that all computers they will ever communicate with are on the same network (to get them working in a routed environment, you must bridge the networks). Todays modern networks are not very tolerant of protocols that do not understand the concept of a multi-segment network and most of these protocols are dying or falling out of use.

· NetBEUI
· DLC
· LAT
· DRP
· MOP

RIP (Routing Information Protocol)

RIP is a dynamic internetwork routing protocol primary used in interior routing environments. A dynamic routing protocol, as opposed to a static routing protocol, automatically discovers routes and builds routing tables. Interior environments are typically private networks (autonomous systems). In contrast, exterior routing protocols such as BGP are used to exchange route summaries between autonomous systems. BGP is used among autonomous systems on the Internet.

RIP uses the distance-vector algorithm developed by Bellman and Ford (Bellman-Ford algorithm).

Routing Information Protocol

Background

The Routing Information Protocol, or RIP, as it is more commonly called, is one of the most enduring of all routing protocols. RIP is also one of the more easily confused protocols because a variety of RIP-like routing protocols proliferated, some of which even used the same name! RIP and the myriad RIP-like protocols were based on the same set of algorithms that use distance vectors to mathematically compare routes to identify the best path to any given destination address. These algorithms emerged from academic research that dates back to 1957.

Today’s open standard version of RIP, sometimes referred to as IP RIP, is formally defined in two documents: Request For Comments (RFC) 1058 and Internet Standard (STD) 56. As IP-based networks became both more numerous and greater in size, it became apparent to the Internet Engineering Task Force (IETF) that RIP needed to be updated. Consequently, the IETF released RFC 1388 in January 1993, which was then superceded in November 1994 by RFC 1723, which describes RIP 2 (the second version of RIP). These RFCs described an extension of RIP’s capabilities but did not attempt to obsolete the previous version of RIP. RIP 2 enabled RIP messages to carry more information, which permitted the use of a simple authentication mechanism to secure table updates. More importantly, RIP 2 supported subnet masks, a critical feature that was not available in RIP.

This chapter summarizes the basic capabilities and features associated with RIP. Topics include the routing update process, RIP routing metrics, routing stability, and routing timers.

Routing Updates

RIP sends routing-update messages at regular intervals and when the network topology changes. When a router receives a routing update that includes changes to an entry, it updates its routing table to reflect the new route. The metric value for the path is increased by 1, and the sender is indicated as the next hop. RIP routers maintain only the best route (the route with the lowest metric value) to a destination. After updating its routing table, the router immediately begins transmitting routing updates to inform other network routers of the change. These updates are sent independently of the regularly scheduled updates that RIP routers send.

RIP Routing Metric

RIP uses a single routing metric (hop count) to measure the distance between the source and a destination network. Each hop in a path from source to destination is assigned a hop count value, which is typically 1. When a router receives a routing update that contains a new or changed destination network entry, the router adds 1 to the metric value indicated in the update and enters the network in the routing table. The IP address of the sender is used as the next hop.

RIP Stability Features

RIP prevents routing loops from continuing indefinitely by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops in a path is 15. If a router receives a routing update that contains a new or changed entry, and if increasing the metric value by 1 causes the metric to be infinity (that is, 16), the network destination is considered unreachable. The downside of this stability feature is that it limits the maximum diameter of a RIP network to less than 16 hops.

RIP includes a number of other stability features that are common to many routing protocols. These features are designed to provide stability despite potentially rapid changes in a network’s topology. For example, RIP implements the split horizon and holddown mechanisms to prevent incorrect routing information from being propagated.

RIP Timers

RIP uses numerous timers to regulate its performance. These include a routing-update timer, a route-timeout timer, and a route-flush timer. The routing-update timer clocks the interval between periodic routing updates. Generally, it is set to 30 seconds, with a small random amount of time added whenever the timer is reset. This is done to help prevent congestion, which could result from all routers simultaneously attempting to update their neighbors. Each routing table entry has a route-timeout timer associated with it. When the route-timeout timer expires, the route is marked invalid but is retained in the table until the route-flush timer expires.

Packet Formats
The following section focuses on the IP RIP and IP RIP 2 packet formats illustrated in Figures 44-1 and 44-2. Each illustration is followed by descriptions of the fields illustrated. RIP Packet Format

· Command—Indicates whether the packet is a request or a response. The request asks that a router send all or part of its routing table. The response can be an unsolicited regular routing update or a reply to a request. Responses contain routing table entries. Multiple RIP packets are used to convey information from large routing tables.

· Version number—Specifies the RIP version used. This field can signal different potentially incompatible versions.

· Zero—This field is not actually used by RFC 1058 RIP; it was added solely to provide backward compatibility with prestandard varieties of RIP. Its name comes from its defaulted value: zero.

· Address-family identifier (AFI)—Specifies the address family used. RIP is designed to carry routing information for several different protocols. Each entry has an address-family identifier to indicate the type of address being specified. The AFI for IP is 2.

· Address—Specifies the IP address for the entry.

· Metric—Indicates how many internetwork hops (routers) have been traversed in the trip to the destination. This value is between 1 and 15 for a valid route, or 16 for an unreachable route.

Note: Up to 25 occurrences of the AFI, Address, and Metric fields are permitted in a single IP RIP packet. (Up to 25 destinations can be listed in a single RIP packet.)

RIP 2 Packet Format

· Command—Indicates whether the packet is a request or a response. The request asks that a router send all or a part of its routing table. The response can be an unsolicited regular routing update or a reply to a request. Responses contain routing table entries. Multiple RIP packets are used to convey information from large routing tables.

· Version—Specifies the RIP version used. In a RIP packet implementing any of the RIP 2 fields or using authentication, this value is set to 2.

· Unused—Has a value set to zero.

· Address-family identifier (AFI)—Specifies the address family used. RIPv2’s AFI field functions identically to RFC 1058 RIP’s AFI field, with one exception: If the AFI for the first entry in the message is 0xFFFF, the remainder of the entry contains authentication information. Currently, the only authentication type is simple password.

· Route tag—Provides a method for distinguishing between internal routes (learned by RIP) and external routes (learned from other protocols).

· IP address—Specifies the IP address for the entry.

· Subnet mask—Contains the subnet mask for the entry. If this field is zero, no subnet mask has been specified for the entry.

·Next hop—Indicates the IP address of the next hop to which packets for the entry should be forwarded.

· Metric—Indicates how many internetwork hops (routers) have been traversed in the trip to the destination. This value is between 1 and 15 for a valid route, or 16 for an unreachable route.

Note: Up to 25 occurrences of the AFI, Address, and Metric fields are permitted in a single IP RIP packet. That is, up to 25 routing table entries can be listed in a single RIP packet. If the AFI specifies an authenticated message, only 24 routing table entries can be specified. Given that individual table entries aren’t fragmented into multiple packets, RIP does not need a mechanism to resequence datagrams bearing routing table updates from neighboring routers.

Summary

Despite RIP’s age and the emergence of more sophisticated routing protocols, it is far from obsolete. RIP is mature, stable, widely supported, and easy to configure. Its simplicity is well suited for use in stub networks and in small autonomous systems that do not have enough redundant paths to warrant the overheads of a more sophisticated protocol.

Review Questions

Q—Name RIP’s various stability features.
A—RIP has numerous stability features, the most obvious of which is RIP’s maximum hop count. By placing a finite limit on the number of hops that a route can take, routing loops are discouraged, if not completely eliminated. Other stability features include its various timing mechanisms that help ensure that the routing table contains only valid routes, as well as split horizon and holddown mechanisms that prevent incorrect routing information from being disseminated throughout the network.

Q—What is the purpose of the timeout timer?
A—The timeout timer is used to help purge invalid routes from a RIP node. Routes that aren’t refreshed for a given period of time are likely invalid because of some change in the network. Thus, RIP maintains a timeout timer for each known route. When a route’s timeout timer expires, the route is marked invalid but is retained in the table until the route-flush timer expires.

Q—What two capabilities are supported by RIP 2 but not RIP?
A—RIP 2 enables the use of a simple authentication mechanism to secure table updates. More importantly, RIP 2 supports subnet masks, a critical feature that is not available in RIP.

Q—What is the maximum network diameter of a RIP network?
A—A RIP network’s maximum diameter is 15 hops. RIP can count to 16, but that value is considered an error condition rather than a valid hop count.

This article is submitted by Kashif Raza http://www.networkingtutorials.net

1.Thou shall create audio products as the fastest way to come out with a product.

Forget about e-books. They take to long to create especially if you’re a slooooow typist. You can create an audio product in a day instead of weeks or months with an e-book. If you must create an e-book, do the audio first and have someone transcribe the audio into a word file. You than clean it up and add some chapter heads and an index and Bam! You have an instant e-book

2.Thou shall use a headset microphone for your recordings.

I find that using a headset mic is a lot more versatile than a standard microphone. A headset mic gives you the freedom to move your head around and you don’t feel restricted as far as being positioned in front of a table top mic.

3.Thou shall not be afraid to record your voice.

Many people hate the way they sound on tape (me included) and feel that they cannot put together a "Professional" product. The first time you hear yourself on tape you are just going to die. It takes practice to actually speak properly. You get struck by the dreaded Uh and Um syndrome and the monotone voice virus but take heart ?you can do this. Slow down and concentrate on what you’re saying and interject some emphasis and pitch changes to your voice. Bottom line?add some personality.

I’ll admit I’m no professional speaker myself? It takes practice and you will get better.

Here are a couple books you might want to check out: The Quick and Easy Way to Effective Speaking by Dale Carnegie Secrets of Successful Speakers: How You Can Motivate, Captivate, and Persuade by Lilly Walters

4.Thou shall add intro and outro music to your audios

If you really want to add a professional polish to your products you must add the intro and outro music. You know that cool music you hear at the beginning of the audio just before someone starts the introduction.

You could give this site a try: frontandbackmusic.com for some demos.

5.Thou shall use different formats for your audio info product

A couple of ways to create an audio product is to interview someone over the phone and record it or just do a straight forward gab session on your own. To keep it simple when I’m recording on my own, I write down some bullet points to use as memory joggers to keep me on track during the recording sessions. Also, when using the computer software it allows you to pause so you can get your thoughts together and then just restart the recording process without a skip.

6.Thou shall use different listening formats for your audio product.

When distributing your audios you have different formats to choose from. You can use .wav, .mp3, .ram files. Wave files take up the most space and are megabyte hogs. Mp3 and ram (real player files) take up the least amount of space and are good for streaming audio on the web. If you are distributing your audio on CD it is best to use wav. That way you will be able to listen to them in any CD player. Here is a little warning when recording your audio projects. Be aware of the space you have on your hard drive. A two hour recording session will take up to 1.3 gigabytes of space in wav. I like to record and edit in smaller intervals and burn them to a CD-RW just to get them off my hard drive.

7.Thou shall use cheap resources for your audio.

I get all my bubble pack shippers and CD cases off of Ebay. They have some great deals. I get my CD’s duplicated at Diskfaktory.com because they can run small quantities of 50. I wouldn’t get any more made until you know you have a winner.

8.Thou shall have fun when creating your audio products

I have to say I really enjoy the creation process and it’s really neat when you go to record a product and can play it back and listen to it on the fly. You get a sense that this thing is really coming together. And when you add the music you really get a sense of satisfaction. Creating audio is really instant gratification when it comes to creating info products. I love it?

As of this writing, I’m working with my wife on a product and I’m interviewing her and we are having a blast. She makes mistakes and I make them and we just sit there and laugh. My wife has the UH and UM syndrome so we are trying to get cured of that? But the point is that we are having a good time.

Quick Tip: I use a splitter to add two microphones to my computer. You need to raise the volume to get it normalized.

9.Thou shall build a audio information empire

If you really want to get a jump start in the information product business this is the easiest and funniest way to do it. As fast as you can record and edit these things the faster you can crank them out and start making some money. Also audio CD and tapes have a higher perceived value and you can get more for them then by just selling an e-book.

10.Thou shall learn what software to use for your audios.

Software can be expensive. Many of the gurus recommend Sounforge but I prefer a program from Cakewalk called Plasma. This software is half the price of Soundforge and is very versatile.

Well there you have it. Some good tips to get you started on building your audio empire.

Happy Recording,

John Kiel

(c)2005 John Kiel

If you’re looking to take a shortcut and you would like me to take you by the hand and show you all the tricks to record audio products, add audio to the web, and record telephone conversations then my new video and audio tutorial course is for you. I even throw in 5 software programs to launch your audio business and at a price you will not believe.Go now to http://www.audioproductsmadeeasy.com

iPod users start to get the picture and it’s turning out to be colorful fun!!

The latest generation of hi tech gadget users are watching the different media they use start to converge as Apple launches its latest grab for the market with iPod Photo. Not only can you listen to all your music on the go, or organize your business and social life, but now your entire photo collection can be viewed at hand too. With the latest color screens iPod users can turn the favorite toy into a slideshow which is set to music. Watch this with friends hanging out at the beach or connect it to your TV and away you go.

Imagine putting your holiday photos to your own sound track and being able to view it wherever you want, well this is now possible to do, and with the 60GB version you can hold up to 25,000 photos. Of course, if you want to mix these up with music the storage would be shared but still with the longer lasting battery in the new generation of iPod you can get up to 5 hours of slideshow or 15 hours of music according to Apple.

All this is possible to use with your Apple Mac or PC using Autosync to make the synchronization of your music and pictures automatic. Visitors to http://www.auctions-andmore.com/articles2/3 are informed of many of the features of the latest iPods and the best deals around for purchasing these items. From their website you can access hundreds of online deals for the whole range of iPod products.

The latest iPods are set to rock the market once again with their latest visual addition. The only question is?.where will all this convergence end up? Soon these multi function devices may move into the area of telecommunications with the prospect of watching digital TV or videos. Perhaps our mobile phone will become our MP3, video and still camera with 5 mega-pixel definition. Who knows? But for the time being Apple have once again moved ahead in the hard-drive, hand-held multi-media gadget race.

iPod is produced by Apple which can be found at: www.apple.com.

About The Author

David Llennac is working in the field of Education and is the owner of the website http://www.auctions-andmore.com.

Data recovery is a tricky thing, and if you’ve somehow deleted or had your important files corrupted or lost due to human error, business espionage, faulty hardware or software or any other reason; the good news is that your lost data is probably recoverable. This article will show you a few things NOT to do when an event such as this occurs.

Don’t run the drive anymore, or use the device. (MP3, portable storage, camera card, whatever) If you think it won’t hurt to even just poke around the internet for a solution to this mess you’ve made/found, you’re wrong! Don’t install or run anything on the drive you hope to recover data from. Only access this drive again from a healthy PC with the software solution you’re going to use. Since files are overwritten in the order they’ve been deleted, the last files that have been excised from your drive will be the first to be lost permanently. Even just surfing, with all the cookies and temporary internet files that are always being generated will often doom the process without you even knowing about it.

Don’t use tools that may reside on your computer, such as Scandisk, or a boot record utility, as these will probably overwrite exactly the files you’re seeking to get back.

In short, be careful! Your data may very well be recoverable, as long as you don’t do something to erase it forever! Find a good data recovery software solution, and then follow the instructions to the letter, and you’ll more than likely live to see your lost data return!

Keith Thompson is the webmaster at Data Recovery Service a site cenetered around helping you get back your lost data!

Tablet PCs are great. If you are a mobile person, and you have never considered getting a tablet PC in the past, now is as good a time as any to start checking them out - the technology is cutting-edge, the usability is superb, and prices are starting to drop.

There are two main types of tablet PCs: convertible and slate. Convertible tablets look a lot like normal laptops except the screen can be rotated all the way around and laid down flat across the keyboard. You then input information through the screen using a stylus. Slate tablet PCs include only the screen interface ? though they are fully integratable with peripherals like keyboards and mouses, the computer itself does not have them. Both types are viable options, depending on your personal preferences and what you’ll be using it for.

As with any technology, tablet PCs have advantages and disadvantages. Thanks to the last few years of development and enhancement, the disadvantages are shrinking in number, and the perks are becoming more and more enticing.

Advantages of Tablet PCs

Far and away, the best thing about tablet PCs is their mobility. You can take and use them anywhere you go, the same way you would take notebook and pen. That means that when your boss bumps into you in the hallway and gives you a number of assignments, you can write them down. In meetings you don’t have to hide your face behind the monitor of your laptop because you can lay the tablet PC flat on the table. For students, this mobility is great - you can study your notes while you’re waiting in lines or even in the car.

Tablet PCs let you use digital ink to store handwritten notes, graphs, charts, and pictures. You don’t have to worry about taking your laptop and a notepad and pen to meetings or classes. Using the stylus, tablet PCs record your handwriting and drawings. They can convert your handwriting to text if you need to turn in an assignment typewritten.

All of the money you have been spending on pens, pencils, highlighters, notepads, papers, binders, folders, staples, and paperclips stays in your pocket. Because of the digital ink option on tablet PCs, much of the need for paper supplies and writing utensils is eliminated. You can keep all your notes on your computer.

Finally, one of the advantages of tablet PCs over regular laptops is that you don’t lose any functionality from your computer. Tablets operate on similar platforms and run many of the same programs. In fact, many programs integrate all of their normal functions with digital ink, so you can add notes to documents and even email your handwritten notes to someone.

Disadvantages of Tablet PCs

Despite my obvious zeal for tablet PCs, I recognize that there are still some disadvantages. First is the price. The prices for tablet PCs are coming down quite a bit from when they were first released, but on average, you can expect to spend more for a tablet PC than for its equivalent laptop. Depending on the bells and whistles you’re looking for, expect to pay anywhere from $1,000 on up.

The handwriting-to-text conversion does not always work the way you wish it would. Just like speech-to-text systems require a trained style of speech to work properly, tablet PCs recognize a trained penmanship easier than the way you may write naturally. A lot of the kinks in these conversion systems have been worked out - but don’t plan on handwriting your next novel expecting to be able to convert into a print-ready copy with no problems.

Finally, their smaller size is both an advantage and disadvantage. They are much more mobile than their laptop counterparts, but the viewing area is also smaller. Likewise, the keyboard also shrinks down to accommodate the smaller size, so if you feel like your fingers are already cramped on a laptop-sized keyboard, you’ll want to make sure you’re going to be able to use the tablet PCs before you buy one.

Nick Smith is a client account specialist with 10x Marketing - More Visitors. More Buyers. More Revenue. For organizational software that will help you take full advantage of tablet PCs, visit GoBinder.com.